Apple chip mount products are widely used for power connections in intelligent systems such as computers, mobile digital, car anti-theft, and more.

Note: All dimensions are in millimeters

Total height of the male head: 7.4 four foot sinker -10P full chip Apple motherboard - iPhone7/7plus charging plug, data/charging/listening.

Exposed rear cover thickness: 0.9

FPC cable specifications: Four foot sinking board -10P full chip Apple motherboard - iPhone7/7plus charging plug, data/charging/listening.

Cable width: 5.4

Cable thickness: 0.2 four foot sinker -10P full chip Apple motherboard - iPhone7/7plus charging plug, data/charging/listening.

Welding position width: 1.0

Welding position length: 1.5 four foot sinker -10P full chip Apple motherboard - iPhone7/7plus charging tail plug, data/charging/listening to music.

Weld spacing: 1.0

Rated current: 1A four foot sinking board -10P full chip Apple motherboard - iPhone7/7plus charging plug, data/charging/listening to music.

Notes for Apple Mother Seat:

1、 Electric shock and fire hazards

Wiring errors, the use of damaged components, foreign objects (such as metal fragments), and the mixing of residues (such as cleaning agents) can all pose a risk of short circuits, overheating, and electric shock.

In a live state, it is never allowed to disconnect the connected components, otherwise there may be an arc and local overheating, which may cause damage to the components.

2、 Processing

Before assembly and installation, a visual inspection should be conducted to check if the apple base and its components are damaged. If there are suspicious components, the supplier should be consulted and if necessary, sent back to the factory for further inspection. The assembly and assembly work of the apple base can only be carried out by trained and qualified personnel. During installation and assembly, it is necessary to use the correct tools to achieve safe and reliable performance.

3、 Using

Connectors with exposed pin cores are absolutely not allowed to be live (or become the power supply terminal in the circuit). In general, voltage above 30VAC or 42VDC is considered a dangerous voltage, and all measures should be taken to avoid connecting connectors with exposed pins to the above voltage signals.

4、 Test voltage and working voltage

The maximum allowable working voltage value depends on the effective national or international standards for specific application scenarios. The factors that affect the working voltage include spatial distance and creepage distance. The voltage reference values listed in the catalog may be influenced by printed circuit board design or assembly circuits. The test voltage shown in the catalog is 75% of the average breakdown voltage. The pressurization speed of the test voltage is 500V/s, and the duration is 1 minute.